a کلمپ اممیٹر ٹو چیک کے لیے کم وولٹیج لائن لیکیج اور چوری کا استعمال
درست استعمال کا ڈیجیٹل ڈسپلے ٹیسٹ پین ماسٹر ماسٹر مندرجہ ذیل مواد٪ 3 اے
(1) Button Description:
٪0a (A کلید) ڈائریکٹ٪2c براہ راست پیمائش بٹن (دور سے ایل سی ڈی سکرین)٪2c وہ ٪2c ہے جب قلم سے براہ راست رابطہ سرکٹ٪2c براہ مہربانی یہ بٹن دبائیں۔
٪0a نوٹ٪3a نو مادہ کیسے قلم پرنٹ٪2c براہ مہربانی یاد رکھیں کہ ایک دور دور سے ایل سی ڈی سکرین براہ راست پیمائش٪3b مائع کرسٹل سینسنگ کلید ہے۔
(2) The digital display test pen is suitable for direct detection of AC and DC currents ranging from 12 to 250 V, as well as indirect detection of AC zero lines, phase lines, and breakpoints. It can also measure the on/off of uncharged conductors.
(3) Direct detection:
٪0a٪e2٪91٪a0 آخری نمبر ماپی گئی وولٹیج قدر ہے۔
② When the high break display value is not 70 percent , the low break value is displayed.
٪0a٪e2٪91٪a2 جب پیمائش براہ راست موجودہ٪2c ٹچ دوسرے قطب آپ کے ہاتھ کے ساتھ۔
٪0a(4) بالواسطہ ڈیٹیکشن٪3a ہولڈ ڈاؤن دی بی کلید اور جگہ قلم ٹپ قریب ٹو پاور ڈور۔ اگر پاور کورڈ لائیو٪2c ہائی وولٹیج علامت ڈسپلے ڈسپلے ڈسپلے دی ڈیجیٹل ڈسپلے قلم ہے۔
(5) Breakpoint detection: Press and hold the B key, and when moving longitudinally along the wire, the breakpoint is located where there is no display in the display window.
٪0a کیوں صفر لائن کی پیمائش قلم نہیں روشنی خارج ہوتی ہے
Not only is there current passing through, but it is also equal in magnitude to the current in the live wire, because the zero wire is connected in series with the live wire and the consumer, and the current in the series circuit is equal everywhere. Don't believe it, just use an ammeter to measure it. As for why it cannot be measured with a measuring pen, it is simple because the measuring pen is used to distinguish between the live wire and the zero wire, or to determine whether a conductor is connected to the live wire, and cannot determine whether there is current. When the metal body of the stylus tip contacts the live wire or a conductor connected to the live wire, a circuit is formed from the live wire through the stylus, the human body, and the ground. Because there is a 220V voltage between the live wire and the ground, a weak current flows from the live wire through the stylus and the human body to the ground. The neon tube of the stylus emits light, but it is not the same as the current in the live wire. When the metal body of the stylus tip contacts the zero line, there is no voltage between the zero line and the ground, so no current flows through the stylus, and the neon tube of the stylus does not emit light.
